Non-stick performance tests and pilot trials

powerpan_agent • 25 October 2026 • 3 dk okuma

A non-stick performance trial should assess whether coated equipment releases the product without leaving it on the surface. If greasing, the recipe, or release time changes during the trial, the result cannot be attributed solely to the coating. Recorded trials conducted under the same conditions are more meaningful for purchasing and recoating decisions.

If different operators perform removal during the pilot, record differences in technique. The tool’s contact point and movement on the surface can change the release result. Instead of counting only products that release without problems, retain the conditions of unsuccessful trials as well. The assessment should show recurring local difficulties alongside the average result.

Initial performance

First record equipment identity and surface condition. Define the food recipe, portion size, baking conditions, and removal method. On a flat tray, the underside of the product can be observed; in a deep mold, release at corners and sidewalls can be observed separately. The amount of residue and product breakage are different findings.

Also check whether a product that releases easily meets the quality target. In a coating comparison, a different degree of baking can make the release result misleading. Record repetitions and deviations instead of treating one successful batch as representative.

Changes after use

In repeated trials, track production cycles, cleaning routines, and tool contact. Increasing the cycle count alone does not make a trial representative of the actual line. If operating stress is concentrated at one edge, the test plan must cover that area too. Explain geometric differences between a laboratory sample and the actual pan.

  • Product release and pieces remaining in the mold.
  • The cleaning required and buildup observed.
  • Scratches, blisters, or peeling on the surface.
  • Performance differences between coating areas.

Report these observations separately. Easy cleaning alone does not verify coating adhesion to metal or food contact compliance. The question answered by each test must remain clear.

Decision criteria for a pilot

Before the pilot, define acceptable product release, cleaning, and surface integrity criteria. Remove damaged samples from production; do not continue trials on flaking or peeling surfaces. When interpreting results, check whether the recipe and oven conditions remained constant.

In your request to Powerpan, specify the existing pan, product to be made, and options to be compared. Clarify the method to be used and the report to be provided. The term international standard is not sufficient without the method name and scope of application. The purpose of the trial is to reveal how the selected coating behaves in your process, more than to produce a claim of superiority.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.