TECHNICAL RESOURCES

How to read coating performance test reports

Document overview

A performance test report shows how a coating behaves under a particular exposure. An abrasion result cannot be compared with another product without knowing the load and method used. The cycle count in a heating and cooling trial does not directly state how many years the coating will last in production, either. The report is useful for connecting the measured behavior with actual operating conditions.

Define the test question first

Difficult product release, edge wear, and cleaner effects are different questions. A non-stick trial examines product release from the surface; an adhesion assessment examines the coating’s bond to metal; an abrasion trial examines resistance to a defined mechanical action. They may appear in the same report, but their results must not be used interchangeably.

If the test sample is a flat panel, explain how well it represents mold corners, areas around perforations, or stacking contact. Record the sample’s coating system, preparation, and condition before testing. A new surface and a used surface do not have the same starting conditions.

Records that make comparison possible

  • The sample’s product code and coating layer structure.
  • The method name and the load or contact conditions applied.
  • Trial duration, temperature, and cycle definition.
  • The measured result, number of repetitions, and acceptance criterion.
  • A surface photo at the end of the trial and the defects observed.

It must be clear which threshold was used when a report describes a result as good. Listing numbers obtained with different test settings in one table is not enough to establish that one product is more durable than another. First clarify differences in methods and samples.

Adding an operating trial

A laboratory report is one part of a purchasing assessment. A controlled pilot using the actual dough, greasing practice, oven load, and cleaning routine helps assess how results translate to the operation. Define the pilot’s starting conditions and the findings that will trigger a stop in advance.

A performance report is not food contact documentation and does not determine a warranty period automatically. When contacting Powerpan, explain the problem to be solved, existing equipment, and process conditions. Use this information to clarify the required test scope. On receipt of the report, linking the sample to the order and explaining the limits of the results is more valuable than simply seeing a high test count.

Share this document:

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.