TECHNICAL RESOURCES

Coating quality reports and acceptance checks

Document overview

A measurement value alone is not enough in a quality report. It must be clear which pan and area it came from and which method was used. When coated equipment is delivered, the report connects the order requirements with the inspection performed. Without that connection, a good result from another sample says little about the batch delivered.

Product and batch identity

Look for the product description, dimensions, coating system, order or batch details, and inspection date at the start of the report. Distinguish the number of samples examined from the total quantity delivered. Presenting a test performed on a sample as though it had been performed on every part wrongly extends the report’s scope.

For recoated pans, findings about the existing body must also be considered. Bending, edge damage, and corrosion are inspection issues separate from coating appearance. A smooth-looking surface does not by itself show that the equipment is mechanically suitable for the production line.

Matching measurements to acceptance criteria

CheckExplanation to look for in the report
Film thicknessMeasurement areas, instrument method, and target range
Visual inspectionDefects examined and acceptance conditions
AdhesionTest method, sample, and rating
Body conditionDimensional and shape checks and any deviations

If thickness is reported only as an average, differences at the edges or bottom may not be visible. The measurement plan must suit the part geometry. Compare the adhesion test method and acceptance rating with the specification established in advance; the same rating must not be assumed for every coating.

What the report does not show

Production quality control, long-term non-stick performance, and food contact compliance are different assessments. Completing a thickness measurement does not establish service life or a migration result. If additional performance is required, separately define which test will correspond to which operating conditions.

When requesting a report from Powerpan, provide product and batch details, the purchasing specification, and the inspection topics needed. If the report shows a deviation, clarify its explanation and the action to be taken before deciding whether to accept delivery. Linking the report to maintenance records helps compare later surface changes with the initial delivery findings. Confirm the report type, delivery format, and scope in writing at the quotation stage.

Share this document:

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.