TECHNICAL RESOURCES

Coating durability tests: choosing the right trial

Document overview

Coating durability is not a single property. Resistance to spatula contact, integrity during heating and cooling, and compatibility with a cleaner represent different effects. The durability test needed must be determined by where and how the equipment is used. A surface that performs well in one test should not be expected to behave the same way in every application.

Mechanical effects

In an abrasion trial, the movement, load, and abrasive tool applied to the surface determine the result. Report the measured mass loss or surface change together with these conditions. A flat-panel trial may not fully represent stacking friction at a pan edge or product removal from a deep mold.

The behavior of the metal body also matters when assessing impact. Deformation of a thin body is examined alongside coating damage. Do not conclude from the coating surface alone that every mechanical defect originates in the coating material.

Thermal and chemical conditions

ExposureInformation to define during planning
Thermal cyclingHeating, holding, and cooling conditions
CleanerComposition, concentration, and contact time
Product contactFood type and contact pattern in production
Mechanical useTool, contact point, and type of movement

A thermal trial is not defined solely by the oven’s peak temperature. Whether the part reached that temperature and how it was cooled must also be evaluated. In a chemical trial, naming a cleaner is not enough; record how it is used.

From testing to an acceptance decision

Define sample count, assessment method, and acceptance conditions before the trial. Cracking, peeling, blistering, and changes in non-stick performance can be reported as separate findings. Reducing results from different methods to a single durability score obscures which weakness was observed.

Do not infer a guarantee of long life or safe use outside the limited test conditions. Food contact compliance is assessed separately. When discussing a durability assessment with Powerpan, share the equipment type, operating temperature, cleaner used, and damage encountered. This information provides a more specific test plan than a general search for the most durable coating. Numerical superiority between branded systems cannot be established without seeing the methods and sample details in actual reports.

Share this document:

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.