TECHNICAL RESOURCES

Product specifications for coating systems

Document overview

Product specifications must define the conditions and limits under which a particular coating system will be assessed. Material families such as PTFE, PFA, FEP, or ECTFE are not a single finished product specification. Different formulations and application structures can exist within the same family.

Product identity in the specification

Read the product name, code, technical data sheet version, and application scope together. Brand names and base material names must not be used interchangeably. Operating values for the finished coating cannot be inferred from general properties of the base polymer. If the supplier or formulation changes, confirm separately whether the same values still apply.

TopicRequired explanation
TemperatureContinuous or short-term conditions and contact environment
Film structureSystem components and application scope
Chemical compatibilitySubstance, concentration, temperature, and duration
Food contactFile scope for the specific product and use
Test resultMethod, sample, and acceptance criterion

Conditions behind numerical values

Do not compare friction, hardness, or film thickness without units and methods. A value from a laboratory sample cannot be transferred directly as a performance guarantee to a part with different geometry. Service life results require product and usage history. Likewise, a porosity check does not mean resistance to all chemicals.

Surface preparation conditions must be specific to the metal and selected system. Do not specify the same blasting pressure, abrasive, or curing program for every coating. The technical specification must also define application areas and connections to be masked. Parts with tight operating clearances require separate assessment.

Turning specifications into a quote file

You can send Powerpan drawings, dimensions, metal information, operating temperature, and materials in contact with the surface. If an existing coating will be renewed, add surface history and damage photos. Clarify the required inspection and document scope at the quotation stage. Check the selected product code in the current technical data sheet and the conditions under which the required values apply.

After ordering, keep records of the applied system and acceptance under the same product identity. On return to production, conduct an actual operating trial and check mechanical fit. A specification is not meant to list as many values as possible, but to show clearly which requirement was accepted for which part.

If a value comes only from a raw material data sheet, demonstrate separately that it represents the same result for the finished surface. Include metal type, film structure, and application conditions in the technical comparison. If the sample in an inspection report differs from the actual part, explain that difference. When transferring results into a specification, relate them only to the application and conditions assessed.

Share this document:

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.