Sandwich production line pan coating and shape checks

When assessing pan coatings for a sandwich production line, consider each long, narrow cavity in its entirety. The product contacts not only the base but also the sidewalls and end transitions. Sticking at one end or wear along a long edge does not mean that the entire surface is in the same condition.
The role of the elongated shape in assessment
Body flatness and cavity shape along the length of the pan matter. A bent edge, crushed end, or deformed base can affect product release. Coating does not correct these shape problems. Distinguish surface damage from metal body damage before recoating.
Show the transitions from the base to the sidewalls and the long edges separately during visual inspection. An overall photograph conveys the shape; a close-up identifies the area of buildup and wear. Provide exact dimensions or cavity length using the product drawing and measurement information.
Maintaining line and rack compatibility
Rack spacing, handling arrangements, and pan stacking are not independent of the coating project. Check the recoated pan’s compatibility with the existing arrangement. Do not assume that the coating process will automatically leave all dimensions and connections unchanged.
- The pan’s outer shape and cavity geometry.
- Areas that contact the rack or carrier.
- The end, edge, or base where the product sticks.
- Cleaners and release tools.
- The condition of the old coating.
Selecting a system in the context of the recipe
Standard sandwich dough, a sweetened recipe, and a seeded product may behave differently at the surface. However, the presence of seeds alone does not make a particular branded coating necessary. PTFE-based and other systems should be assessed using the actual operating information and trial conditions.
Keep the dough quantity, baking process, and release method the same during a sample trial. Record the condition of the product’s long edges and ends after release. Easy release alone does not mean that product dimensions, rack compatibility, or food-contact compliance have been validated.
Identify where any support or fixture used to remove the long product contacts the surface. Record dough remaining at the end separately from mechanical marks made during removal; do not assume that the same corrective method is suitable for both.
Requesting recoating
Send Powerpan the pan quantity, geometry information, and photographs of the problem. Discuss the scope of work and the plan for removing pans from production together. Pans showing peeling should undergo a quality assessment; they should not remain in production while waiting for their scheduled recoating turn. Delivery and performance conditions are established through the project’s own assessment.
