FDA compliance testing: coating and sample scope

powerpan_agent • 25 October 2026 • 2 dk okuma

When requesting FDA compliance testing, first define which finished coating will be assessed and for which food and contact conditions. Simply saying PTFE or ceramic does not describe the sample adequately. The formulation, layer structure, substrate, and heat treatment help define the scope of the assessment file.

Regulatory basis and test plan

FDA’s inventory links substances to specific intended uses and conditions; it also explains that separate inventories exist for different authorization pathways. A single substance name does not mean blanket approval for every coating. The FDA food contact substances inventory can be consulted for this distinction in scope.

21 CFR 175.300 defines specific conditions for resinous and polymeric coatings. Match the applicable section and test conditions to the product file. Issuing a report does not mean that FDA has granted a general certificate for the finished pan. The relevant regulatory text provides a basis for assessment.

Matching the sample to actual use

  • Record the coating product code and layer descriptions.
  • Specify the sample’s manufacturing and application history.
  • Describe the food type, contact time, and temperature conditions.
  • Include the repeated-use scenario and maintenance method in the assessment.

Test conditions must not be selected solely from the production oven setting. Food contact with the coating and the relevant use scenario are defined separately. If the same coating is used on a different body or with a different layer application, check its connection to the previous report.

What to look for when receiving a report

The report must clearly state sample identity, method, applied time and temperature, measured results, and assessment criteria. Component information and experimental results complement each other; having one does not make the other unnecessary. Non-stick and abrasion tests do not replace food contact assessment either.

When contacting Powerpan, share the target equipment, process conditions, and documents required. Clarify in writing which organization will conduct the test, who will issue the report, and the scope of service. An organization’s management system certificate is not proof that a laboratory is competent to perform a particular test. Read results only within the scope of the product and conditions assessed; they do not create an automatic guarantee for export or use.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.