Coating Terminology Glossary

powerpan_agent • 25 October 2026 • 3 dk okuma

Coating terms may not mean the same thing in quotations and technical reports. Distinguishing the material name, application process and finished part properties prevents misleading comparisons. This glossary explains basic terms used in industrial coating discussions.

Material and system definitions

Substrate

The base material or surface to which the coating is applied. The substrate’s type, geometry and current condition must be specified when evaluating an application.

Polymer and coating system

Polymer is a term that describes material structure. A coating system comprises specific products, layers and application conditions considered together. The polymer name does not describe all of the system’s performance characteristics.

Primer and topcoat

The primer is the layer applied close to the substrate in a specified system; the topcoat forms the outer surface. Layer functions and the combination to be used depend on the product instructions. Do not assume that every system has the same number of layers.

Surfaces and bonding

Adhesion and cohesion

Adhesion describes bonding between different surfaces; cohesion describes a material’s internal integrity. The interface at which separation occurs matters when evaluating damage.

Surface preparation

This includes operations such as cleaning, removing the existing layer by an appropriate method and establishing the required surface conditions. The method is selected according to the substrate and coating system.

Surface roughness

Small-scale irregularities in surface geometry characterized by measurement. Ra and Rz are different parameters and must not be used interchangeably. Reports should specify them along with the method and measurement conditions.

Application and measurement

Wet film and dry film thickness

Wet film thickness refers to the wet layer after application; dry film thickness refers to the layer after the specified drying or processing stage. They are not expected to have the same numerical value. The measurement timing and method must be clear in the report.

Curing and sintering

Curing refers to the processing conditions specified for the system to achieve its required properties. Sintering involves particles joining together through heat treatment in suitable materials. These terms do not mean that a new polymer forms in every coating.

TDS and SDS

A technical data sheet (TDS) contains technical information on product use and application. A safety data sheet (SDS) covers the chemical’s hazards and safe handling. An SDS must not be used as a food-contact compliance document for the finished part.

Damage and performance terms

Delamination and blistering

Delamination describes separation between layers or between the substrate and coating. Blistering is a visible raised area on the surface. A visible symptom does not, on its own, establish the cause.

Nonstick performance and abrasion resistance

Nonstick performance concerns how a contacting product releases from the surface; abrasion resistance concerns surface loss under defined mechanical actions. A result for one does not replace measurement of the other. Comparisons must specify the method, load and service conditions.

Share:

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.