Evaluating coating performance

Coating performance analysis should begin with metrics suited to the problem the facility is experiencing. Product release, surface wear, and chemical resistance are different properties. A single measurement cannot establish a coating’s performance under every operating condition or determine its remaining life.
Define the evaluation question first
If the aim is to investigate sticking, record the product formulation and release conditions. If cleaning workload is the issue, track the method, quantity of equipment, and labor separately. Use in a chemical environment requires identification of the substances in contact and the exposure conditions. A general performance score can conceal these distinctions.
Metrics for field monitoring
| Metric | How to record it | Interpretation limit |
|---|---|---|
| Product release | Number of affected products and total production count | Account separately for formulation and baking changes |
| Cleaning workload | Method, person-minutes, and quantity of equipment | Cleaning tasks with different scopes are not equivalent |
| Surface integrity | Location-specific photographs and symptom descriptions | A visual symptom alone does not establish a cause |
| Usage intensity | Defined cycles or operating time | Not the same information as calendar age |
| Maintenance history | Date, action, and observed result | Unrecorded changes limit comparisons |
Separate laboratory measurements from field results
Surface measurements such as contact angle provide information that depends on the liquid and measurement method used. The behavior of a water droplet does not directly establish how dough will release under the same conditions or whether a part is suitable for food contact. Friction measurements must also be interpreted with their test conditions.
State which sample provided the laboratory data and how well it represents the production surface. Do not present a published material-property table as a measurement of the actual part. The report should include the purpose and limitations of the test.
Do not use a universal renewal threshold
There is no single contact angle, number of months, or increase in consumption that applies as a renewal threshold to every coating. Acceptance conditions should be determined by the application, product instructions, and the facility’s quality assessment. Symptoms such as peeling or particle detachment require separate attention; they should not be obscured by averages in performance monitoring.
Prepare for a technical assessment
Record when the problem began, which parts are affected, and any recent changes. Include equipment operating without the problem under the same conditions, if available. Providing Powerpan with part photographs, product details, and usage records is more informative than simply stating that the coating is not working well.
