Comparison Tables

Coating comparison tables are useful when their data answer the same question under the same conditions. If one table lists a polymer name and another lists a commercial product code, the two rows are not equivalent. Check what is being compared first, then how the values were obtained.
Distinguishing material, product and finished part
| Level being compared | Required definition | What it does not establish on its own |
|---|---|---|
| Polymer family | Material name | All operating limits of a specific application |
| Commercial coating product | Product code and technical data revision | That every substrate will give the same result |
| Coating system | Layers and scope of application | The same service life in every operation |
| Finished part | Substrate, geometry, processing and inspection records | Unrestricted suitability under different conditions |
Compare technical values on the same basis
| Criterion | Explanation required in the table |
|---|---|
| Temperature | Whether the value refers to service or curing; duration and use restrictions |
| Thickness | Total thickness or individual layer thickness; unit and measurement method |
| Abrasion | Test method, load and evaluation criterion |
| Nonstick performance | Contacting product, processing conditions and evaluation method |
| Service life | Usage intensity and end-of-life criterion, as well as elapsed time |
| Food contact | How the documentation relates to the product and intended use |
Using the same unit is not enough on its own. Two abrasion results from different test conditions, or product release results measured with different formulations, should not be ranked directly. If the methods do not match, state this in the table notes.
A blank cell does not mean zero performance
A property with no available data should be marked as no information or not comparable. Treating a missing value as zero can make a product with less detailed documentation appear technically inadequate. Unscaled descriptions such as excellent and superior are not equivalent to numerical results either.
Use a common scope for cost comparisons
When comparing quotations, check surface preparation, repairs, coating scope, shipping and delivery terms separately. A lower unit price does not directly demonstrate an economic advantage if the quotation covers a different scope of work. Operating cost comparisons must also use the same period and production volume.
For a table prepared for your operation, first define the mandatory acceptance criteria. Do not treat an option that fails these requirements as suitable because it scores highly in another category. Complete the technical suitability review before evaluating cost and scheduling preferences.
