Coating process videos: stages and inspection

The video will be added soon. You can read the written guide below in the meantime.
A video of the coating process makes it easier to understand the sequence of operations, from receiving the part to final inspection. When assessing the footage, you need to know which part is being processed, with which coating system, and for what purpose. A short application recording does not, on its own, establish all processing conditions or the suitability of the finished part.
Process steps to look for in the video
| Stage | Information to look for in the footage | Additional records needed |
|---|---|---|
| Part receipt | The part’s overall condition and identification | Work order, material information, and damage assessment |
| Surface preparation | The sequence of cleaning and preparation operations | System-specific preparation instructions |
| Coating application | The application area and layer sequence | Product code and application conditions |
| Heat treatment | Loading the part into the processing equipment | Specified temperature and time conditions, and the processing record |
| Final inspection | A demonstration of surface checks and measurements | Acceptance criteria and inspection results |
How should surface preparation footage be interpreted?
A surface that looks clean does not show that all preparation requirements have been met. The method used in the video may not be suitable for another substrate or coating. Settings such as blasting pressure, abrasive type, or chemical treatment should not be copied from a general video; the instructions for the specific part and system should govern the process.
Curing temperature and service temperature are different
The heat treatment applied during production is not the same as the allowable temperature during equipment use. A value shown on the oven display also does not, by itself, describe the temperature history across all surfaces of the part. This distinction should be made clear when a video is used for technical training.
The part of quality control that is not visible
A smooth-looking surface does not mean that the layer structure or suitability for food contact has been verified. The checks required depend on the system and specification. If a measurement is shown in the footage, the method, measurement location, and acceptance criterion should be explained.
A recording selected for training benefits from a processing date, product identification, clear narration, and captions. Because waiting times are not visible in sped-up or edited footage, the video should not be used as a substitute for the actual processing time.
Requesting footage of your application
When asking Powerpan about the coating process, specify the type of part and the stage you want to understand. Confirm whether shareable video of the relevant application is available. When footage can be shared, assess it alongside the product’s technical information and instructions for use.
