TECHNICAL RESOURCES

Technical FAQs: surface preparation, curing, and testing

Document overview

The answer to a technical coating process question is often not a single number. The same pressure, time, or temperature can produce different results with different bodies and formulations. When preparing a specification, the aim is to match the material manufacturer’s instructions to the equipment’s actual use.

Surface preparation

Can blasting pressure be the same for every pan?

Pressure is evaluated together with the abrasive, gun setup, distance, body thickness, and target surface profile. The risk of deformation in thin metal must also be considered. Simply copying a setting from another coating application is not enough.

Does a rougher surface always provide better adhesion?

The aim is a surface profile suited to the selected coating system. Excessive roughness can make coating distribution difficult. Removing grease, dust, and process residue matters as much as roughness. The Ra average alone cannot establish the overall quality of preparation.

Heat treatment

Why is the oven setting not enough on its own?

Part heating varies with the loading arrangement and metal structure. The process record must link part temperature and time through appropriate measurement. Oven air reaching its target does not mean every part received the same heat treatment.

Is curing temperature the operating temperature?

No. Curing is a manufacturing operation; the end-use limit concerns the coating’s operation under specific conditions. Food type, contact time, and thermal load are evaluated separately. A higher curing setting does not automatically provide a higher safe operating temperature.

Testing and compliance

Are adhesion and non-stick performance the same test?

Adhesion concerns the coating’s bond to the substrate. Non-stick performance assesses product release from the coating. Define these two questions separately in the test report, with clear sample details, methods, and acceptance criteria.

Does a single migration result cover every use?

Read a result in the context of the sample examined and test conditions. Recheck the suitability of the previous assessment when use changes. Assuming a common limit or a single test temperature for every coating loses essential scope information.

Preparing a technical request

Send Powerpan equipment photos, body details, coating type, and the stage at which the problem occurs. If sharing a measured value, include the method and unit. Do not attempt sanding, chemical stripping, or recoating of a damaged surface at your facility. A professional assessment based on product and process data produces a more usable outcome than searching for a universal recipe.

Share this document:

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.