TECHNICAL RESOURCES

Coating application notes and process control

Document overview

Copying one list of coating settings to every part does not make production repeatable. The body material, condition of the old coating, part geometry, and technical data sheet for the new system must be evaluated together. Application notes should serve as process records that specify when these variables are checked.

Surface preparation records

Removing grease and residue is a separate operation from roughening. More aggressive blasting of a dirty surface does not replace cleaning. Thin pan bodies must also be checked for deformation during preparation. Record the abrasive used, process conditions, and surface assessment against the relevant part.

The target roughness is not the same number for every metal. The aim is a profile compatible with the coating system; excessive roughness or dust left after processing can cause problems for the new film. Keeping the prepared surface clean during handling and coating it before it becomes contaminated again are part of the workflow.

Application and intercoat checks

StageInformation to record
Material preparationProduct code, batch, and preparation instructions
SprayingPart geometry and target film distribution
Intercoat treatmentDrying and waiting conditions specified for the system
CuringPart temperature, time, and loading arrangement

Spray gun distance, pressure, and film thickness must be based on the material instructions and application trials. Using the same movement at the bottom of a deep mold and along an exposed edge will not produce equal results. Primer use also depends on the selected system; the same primer recipe cannot be recommended for every metal.

Curing and delivery inspection

The oven setting and the temperature reached by the part are not the same data. The monitoring plan should assess the part’s thermal history using an appropriate measurement method. Curing conditions must not be confused with end-use temperature. Processing a coating at a given temperature does not mean it can be used in contact with food at that temperature.

Final inspection considers surface appearance, film distribution, and an adhesion assessment suited to the equipment together. Record each test result with its method and acceptance criterion. Stripping, spraying, and heat treatment are professional facility operations; these notes must not be used as a recipe for applying coatings at a workplace or at home. Discussions with Powerpan can clarify the process scope based on the existing part and expected operating conditions.

Share this document:

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.