TECHNICAL RESOURCES

Coating glossary: materials and processes

Document overview

The same word can refer to different things in a coating quotation. Adhesion sometimes describes food sticking to a pan and sometimes the coating’s bond to metal. Distinguishing these meanings when preparing a technical specification clarifies which performance is required. The following terms help connect assessments of materials, application, and use.

Material and layer names

PTFE is the abbreviation for the polymer polytetrafluoroethylene. Fluoropolymer refers to a family of polymers containing fluorine; materials in this family do not all have the same formulation or operating limits. Mentioning PTFE does not identify every component of the finished coating. Binders and other components must be addressed in the system’s technical documentation.

A primer is the undercoat used between the substrate and subsequent coating layers in the selected system. The topcoat may form the surface in contact with food or the process environment. A multilayer structure combines different functions; the number of layers alone is not a measure of service life.

Surface preparation and heat treatment

TermExplanation
DegreasingRemoving oily contamination from a surface before coating
RougheningCreating a surface profile suited to the coating system
Abrasive blastingA surface treatment method using abrasive particles
CuringDeveloping coating properties under material-specific conditions
StrippingRemoving the old coating before a new application

Curing temperature belongs to the manufacturing process; it is not the same as end-use temperature. Do not assume that every polymer cures through the same chemical mechanism. Stripping and curing are professional operations carried out with appropriate equipment.

Surface behavior and defects

Non-stick performance describes how a contacting product releases from the surface. Adhesion describes the coating’s bond to the substrate. Wear is surface change caused by mechanical contact. Delamination is separation of the coating from the substrate or of layers from each other; it is not the same finding as a residue stain.

Contact angle provides information about how a liquid wets a surface. The coefficient of friction is used to assess resistance to sliding. Neither alone proves that dough will release easily or that the surface complies with food contact requirements. During quotation discussions, ask which test and operating conditions a term refers to; turn vague performance statements into measurable requirements.

Share this document:

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.