Document overview
Not every stain on a non-stick coating indicates the same problem. Accumulated grease, surface scratches, and coating separation from the substrate require different assessments. Identifying the sign correctly helps prevent both unnecessary intervention and continued use of damaged equipment.
When a product is difficult to release
First record where the problem occurs. A change across the entire surface is not the same as difficulty limited to an edge or a single mold cavity. Review production variables such as the recipe, proofing, greasing, baking, and release time. Check whether buildup can be removed by appropriate cleaning without damaging the coating.
Adding more oil or lifting the product with a metal tool does not explain the cause. If comparing similar equipment, use the same product and process conditions. The appearance of a water droplet alone is not a test of non-stick performance or food contact compliance.
Visible surface changes
| Sign | Initial assessment |
|---|---|
| Scratch | Examine tool, cleaning, and stacking contact. |
| Blister | Segregate the equipment; assess coating integrity. |
| Peeling or flaking | Stop use and refer for quality review. |
| Discoloration | Check buildup, thermal history, and coating condition together. |
| Rust or surface loss | Request inspection of the body and food contact surface. |
Puncturing blisters, cutting away peeling areas, or scraping the surface is not appropriate for diagnosis. The quality lead must evaluate the affected equipment and relevant production records. A small defect does not automatically justify continued use.
Baking differences and reporting
Uneven baking may result from the coating, but it may also be related to oven loading, airflow, or body deformation. Check how the pan sits on the rack and whether the problem changes with its position in the oven. Separate these variables before deciding to change the coating.
When reporting a problem to Powerpan, provide the equipment identity, coating date, damage photos, cleaner used, and the stage at which it was observed. The assessment may indicate a need for recoating, body inspection, or process correction. Decisions should be based on specific findings instead of classifying every problem as user error or assuming that every defect can be repaired by one method.
