Film residue sticking to a packaging machine’s jaw can affect the seal impression at the package opening and the need for cleaning. A nonstick coating assessment should start at this contact point. Heat-sealing jaws, cutting blades, and transfer parts perform different functions, so they should not all be approached with the same coating expectations.
Assess film and temperature together at the jaw surface
Specify the film type, sealable layer, and machine operating settings when requesting a quotation. Do not assume the control panel temperature is the same as the temperature of the jaw surface contacting the product. Heating during idle periods, contact time, and pressure are also part of the application conditions.
Grooves, teeth, and areas near the cutter need particular attention when assessing a coating. Coating buildup can affect surface geometry or the fit between opposing jaws. Show the areas to be coated and protected on the technical drawing, including attachment holes and mounting surfaces.
Checks for each part type
| Part | Assessment focus |
|---|---|
| Heat-sealing jaw | Film release, contact surface, and temperature distribution |
| Cutter | Cutting edge, dimensional tolerance, and residue buildup |
| Transfer part | Product contact, friction, and mechanical wear |
Fluoropolymer surfaces are considered to reduce sticking; a coating alone does not guarantee seal integrity. Machine settings such as sealing pressure, film tension, and jaw alignment must also be checked. Trials with the new surface should monitor the facility’s seal integrity checks as well as package appearance.
How should an application request be prepared?
A request sent to Powerpan should include part photographs, drawings, the base metal, existing coating condition, and details of the film used. Explaining whether the problem is continuous or occurs only with a particular product helps narrow the review. Lead time and batch planning should be determined alongside the part’s condition and the scope of work.
Removing residue with a sharp scraper during cleaning can damage the surface. Include the chemicals and cleaning method used in the coating request, and follow the maintenance instructions after application. For parts in food contact, suitability must be assessed for the selected system under the specified conditions of use.
During trials, also record cleaning intervals and behavior when changing films. Easy release of the first packages alone is not sufficient for acceptance. Changes in alignment and pressure settings when the jaw is reinstalled can affect the result; assess surface treatment and installation effects separately for this reason.
