Film residue building up on a seal bar can make the package seam irregular and increase cleaning needs. Coating assessment aims to identify a suitable system that may help film release from the heat-sealing surface. Nonstick behavior alone does not guarantee package seal integrity or seal strength.

Horizontal, vertical, and cross-sealing bars and impulse-heated systems do not all operate in the same way. A bar kept continuously hot and a surface that heats and cools during the cycle require assessment under different conditions. Film type, contact time, and pressure settings should be part of the technical discussion.

Preserve bar geometry

Coating distribution on a flat, grooved, or patterned working surface can affect the seal impression. In systems that operate with a cutter, inspect the cutting area separately. Define the coating scope for sensor seats, connection holes, and mounting surfaces in advance. Consider the new layer’s effect on final dimensions together with machine fit.

Film residue can also be related to unsuitable process settings. Renewing the bar surface alone may not be sufficient when temperature, contact time, or pressure needs adjustment. Check bar flatness and the way it contacts the opposing surface as well.

Trial acceptance criteria

After application, record film release and the package seal result separately. Using the same film and defined machine settings makes the effect of the surface change easier to track. Establish the coating system’s operating limit from actual surface conditions, not from general PTFE values.

  • Machine and bar type, technical drawing, and dimensions.
  • Packaging film structure and contact surface.
  • Cycle, pressure, and temperature conditions.
  • Cleaning chemicals and the area where residue appears.

Assessment with Powerpan is intended to clarify application suitability and the areas to protect. Plan bar removal and reinstallation according to the machine’s technical requirements. Cleaning a coated surface with a metal scraper can cause new damage. If blistering or layer separation occurs, remove the equipment from use and investigate the cause.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.