A nonstick coating on a heat plate may be considered to help a product or process material release from the contact surface. Baking, pressing, and laminating plates do not operate under the same conditions. Chemical protection needs on a heat exchanger plate also differ from these applications. Define the component’s function clearly.

Surface temperature and pressure

The controller setting should not be assumed to equal the temperature of the plate in contact with the product. Include surface temperature distribution, idle periods, and short-term peak conditions in the assessment. For pressing or laminating, applied pressure and contact time are also part of the selection. Assess the coating’s temperature suitability using technical documentation.

A coating is a layer that can affect heat transfer; it cannot be said to improve efficiency or have no effect in every case. Evaluate thickness, contact conditions, and process configuration together. Do not promise baking or processing time outcomes without a trial on the actual component.

Geometry and areas to protect

Check plate flatness, edges, grooves, and mounting holes. Show connection surfaces with dimensional or contact requirements on the drawing. A deformed plate should not be considered to have correct pressure distribution simply because it has a new coating. Assess the base metal’s condition separately from the surface treatment.

ApplicationPriority information
BakingProduct, surface temperature, and food contact
Pressing or laminatingPressure, duration, and contact material
Chemical processChemical, concentration, and conditions of use

Request information and trial

Provide Powerpan with dimensions, base metal, a drawing, and photographs of the existing surface. Also identify where sticking occurs, the cleaner used, and any scraper contact. Assess the selected system’s mechanical and chemical suitability as well as its nonstick function.

During the trial, monitor release behavior, surface integrity, and process heat requirements together. Use the same product and operating arrangement when comparing the coated plate with the previous plate. A successful initial trial does not establish equivalent results for every application.

Sharp scraping and abrasive tools can damage the surface during cleaning. Remove a plate showing blistering or separation from the relevant service for quality assessment. Set the maintenance method in accordance with both the equipment and selected coating instructions.

Different plate areas may serve different functions. Define the product-contact area, areas around connections, and edge transitions separately. Acceptance of the coated component should include these boundaries, not only its appearance at the center. Record changes in contact or pressure after installation in the trial record.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.