Epan Systems

Epan multi-cavity pan for automatic oiling trials

An Epan pan is a multi-cavity mold intended to work with an automatic oiling line. Each cavity's base, walls, and corners are separate assessment areas…

Technical editor: Powerpan Technical Team Last updated: 25.10.2026
Quality management information

An Epan pan is a multi-cavity mold intended to work with an automatic oiling line. Each cavity’s base, walls, and corners are separate assessment areas within the oiling setup. The pan moving through the line does not, by itself, show that every cavity receives oil as intended.

Cavity geometry and nozzle layout

The area reached by oil may differ in round, oval, or angular cavities. Examine cavity depth and transition shapes together with nozzle reach. Oil visible in the center does not mean that sidewalls or corners are adequately covered. Clarify the assessment through a line trial with the person technically responsible for the equipment.

Define the cavity center layout, direction of pan travel, and detection position on the line together. Do not assume that the same oiling program will work for regular and staggered cavity layouts. The existing pan drawing and oiling equipment information are the starting documents for a new product request.

Make the trial measurable

  • Share pan outer dimensions, cavity count, and center spacing.
  • Specify the oiling equipment model and nozzle layout.
  • Include details of the oil and dough in the technical discussion.
  • Monitor distribution on cavity bases, walls, and corners separately.
  • Record release after baking and remaining surface residue.

If reducing oil consumption is a goal, record baseline and trial conditions. If line settings or the recipe change along with the pan, it becomes difficult to attribute results to the pan alone. Lower oil use must still meet product release and appearance targets.

Coating and line maintenance

Do not specify a single surface roughness value as suitable for all doughs and oils. Assess the coating system together with oiling and cleaning conditions. A system name does not establish a fixed service life in years or oiling-line approval.

Regularly inspect coating damage in cavities, dried residue, and body deformation. Separate problem pans; examine nozzle or line settings according to the equipment instructions. A request to Powerpan must support automatic oiling expectations with equipment information. The Epan name alone is not evidence of official compatibility or a brand partnership.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.