Assessment of an oven tray’s release surface should cover the entire base where the product sits. Product remaining in one corner and sticking across a broad area may not indicate the same problem. Examine the existing surface, formulation, and position in the oven together.

Base design and dimensional fit

On a solid tray, check surface integrity and base flatness; on a perforated tray, check the openings and perforation edges. Coating application must preserve these geometries. Record residue buildup or coating damage at openings separately from the overall appearance of the base.

The tray’s outside dimensions, edge construction, and rack seating are part of production compatibility. A bent edge or wavy base is not considered corrected by a new coating. Any work needed on the body must be addressed separately from recoating.

Describe oven conditions accurately

Tray exposure may vary between rotary rack, tunnel, convection, and deck ovens. Naming the oven type alone is not enough, however. The request should also include product, temperature setting, baking time, and empty idle conditions. If localized heating or high-temperature use occurs, verify system suitability separately.

AreaInformation needed
BodyMetal type, dimensions, and solid or perforated base
ProductionProduct, oven, and handling arrangement
MaintenanceCleaner, tools, and stacking method
Current problemLocations of sticking and damage

Checking the new surface

A request to Powerpan should distinguish a new application from recoating. Include old coating removal, surface preparation, and delivery inspection in the quote scope. Different tray areas can be compared during a trial with the actual product. Release of the product in the center alone is not sufficient evidence for the entire tray.

Changes in cleaning needs can also be monitored during use. Coating does not eliminate cleaning; maintenance must follow the selected system’s instructions. Aggressive scraping of baked-on residue can damage the new surface as well.

Use a stacking arrangement that reduces surfaces rubbing against one another. Remove a peeling tray from the relevant use for quality inspection. Prepare the recoating plan by considering body condition together with the facility’s spare stock needs.

If the tray is used at different rack levels, product results can be observed separately. These records help distinguish position effects from a localized surface problem. Sticking in every area and product remaining in just one corner require different investigations. The trial plan should represent the facility’s normal loading arrangement.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.