Quality standards in production

Production quality criteria should be defined together with the coating system used and the part’s function. A single blasting pressure, thickness, or oven program cannot be accepted as the standard for all equipment. Requests to Powerpan should describe the base material, surface structure, and operating conditions together.
A coated part’s uniform appearance is only one aspect of inspection. Preserving geometry, dimensional fit, and operating results are separate topics. An acceptable result at one stage does not establish that the other stages have also been validated.
Preparation and material
For new surfaces, cleaning and preparation are assessed; refurbishment also includes removal of the old layer. The metal body’s condition should be checked after removal. If cracks, corrosion, or deformation are present, the work scope is redefined.
The coating material and application instructions should match. Mixing, waiting times, and application conditions are system-specific. Taking a numerical parameter from another system does not create an appropriate quality standard.
Inspection according to geometry
Internal corners, deep grooves, and large flat surfaces require different application access. Areas to be coated are distinguished from assembly surfaces. The thickness inspection method and measurement locations should suit the part; the inspection scope for hard-to-reach areas is assessed separately.
| Stage | Topic to assess |
|---|---|
| Surface preparation | Base metal and process suitability |
| Application | Scope, distribution, and dimensional effects |
| Curing | Process conditions appropriate to the system |
| Final inspection | Defined acceptance criteria |
The production temperature used during curing is not the part’s operating temperature. If a process deviation occurs, a decision to rebake must not be made automatically; the system instructions and affected parts should be assessed together.
Projects with Powerpan should define the inspection scope, records, and any operating trial required. Nonconforming parts should be segregated, and no delivery or return-to-service decision should be made before the correction has been checked. Defined criteria clearly show which condition has been assessed by which method. If the recipe or process changes in end use, the previous scope of suitability is reviewed again.
