Record the symptoms of a coating problem and assess their effect on use. Sticking, discoloration, scratches, or peeling alone do not establish a definitive cause. In particular, if you suspect material is separating from the surface, remove the equipment concerned from service and notify the facility’s quality and technical personnel.

Initial checks by symptom

SymptomInformation to recordFirst step
Product stickingProduct type, date of onset, and formulation or process changesCompare conditions with records; arrange a surface integrity check
Peeling or separationDamage location, number of affected items, and photographsIsolate the equipment; notify the quality team of implications for use and affected products
BlisteringLocation, extent, and operating historyRequest technical review without altering the surface
DiscolorationAppearance before and after cleaning, and thermal historyDo not decide suitability from color alone
ScratchesDirection of marks and equipment contacting the surfaceReview contact during handling, stacking, and cleaning

Identify changed conditions when products stick

Did the problem begin with a new formulation, does it affect only certain products, or does it occur across all equipment? Parts that work without problems under the same conditions can help with comparison. Compare current instructions with actual practice instead of changing lubrication or temperature at random.

Do not alter a damaged surface

Scraping, sanding, or covering a peeling area with a product of unknown suitability can make assessment more difficult. Record photographs and part information; discuss shipping conditions for inspection if needed. Do not inspect hot or moving equipment until safe access has been established.

Assessment of affected products and decisions about operating the line must be managed under the facility’s relevant procedures. This page does not provide remote authorization to continue production. Any part used to replace suspect equipment must also be checked for suitability.

Information package for technical support

  • Company and order details, and a list of affected equipment.
  • Date the problem was first observed and how it has progressed.
  • Close-up and overall photographs.
  • Recent changes in baking, cleaning, and handling conditions.
  • Maintenance records and previous similar findings, if available.

You can share this information with Powerpan by calling +90 212 886 25 67. Although photographs may support an initial discussion, physical inspection or additional records may be needed to determine the cause. Confirm the action and follow-up plan according to the scope of the assessment.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.