A PTFE coating request for food equipment needs to define the product-contact area. Oven pans, filling hoppers, and dairy processing parts operate in different environments. Assess the required release behavior, cleaning, and temperature conditions separately for each.
How should food-contact suitability be assessed?
The PTFE name does not mean a coated part is automatically suitable for every food and temperature. Review the operating conditions for the complete system, including primer, binder, and topcoat. Product type, contact duration, and temperature are part of the suitability assessment. A management system certificate does not replace this part-specific evaluation.
PFOA-free is not the same as PFAS-free. BfR states that PTFE is also part of the PFAS group. Claims about chemical content should therefore not be used interchangeably. The BfR explanation of PTFE and PFAS supports this distinction.
Coating needs vary by equipment
Assessment may focus on release from a pan, wall residue in a hopper, or product buildup on a vessel component. Coating does not eliminate cleaning in every case. Include formulation, lubrication, and contact with agitators or scrapers in the request. Mechanical contact must not be overlooked when selecting a system.
- Drawing of the surface to be coated and base metal
- Contact food and process temperature
- Operating and idle durations
- Cleaning and sanitation conditions
- Existing damage or sticking areas
Production trials and daily checks
In discussions with Powerpan, assess technical scope and suitability documentation for the actual use. Do not base a decision solely on a brand name or a general food-compatibility statement. Conditions such as high-temperature cooking and open flame require separate verification of system suitability.
During the trial, monitor product release, residue buildup, and surface integrity after cleaning. Less residue does not justify eliminating the cleaning procedure entirely. Continue the facility’s existing hygiene controls.
Remove equipment showing coating blistering or delamination from use for quality inspection. Record changes in use, such as a different cleaner, aggressive scraping, or a new formulation. This information helps assess the source of the problem more accurately before applying a new coating.
If the surface to be coated does not directly contact food, state that in the file as well. Proximity and direct contact are not the same scope. The part’s operating conditions and cleaning environment still need assessment. Define the limits of the suitability review by the equipment’s actual role in the process.
