A damaged coating renewal request should first identify the type of damage. Light scuff marks, widespread wear, blistering, and coating coming off in pieces are not the same condition. In particular, remove equipment with peeling or delaminating surfaces from use and have the facility’s quality manager assess it.
Find the cause instead of covering the damage
Applying a new coating does not by itself remove the cause of recurring damage. Include metal tool contact, unsuitable cleaners, excessive heat exposure, and base metal problems in the investigation. Recording where the surface deteriorated and after which use helps define the application need more accurately.
If metal is exposed around a scratch, inspect the surface and corrosion condition. With blistering or peeling, check the extent of damage. Cracks and deformation require a structural assessment separate from coating damage. Do not claim that recoating will correct every defect.
Inspection file
| Record | Information provided |
|---|---|
| Close-up photograph | Damage type and location |
| Operating conditions | Heat, product, and mechanical contact |
| Maintenance history | Chemical or method changes |
| Body information | Material, dimensions, and structural condition |
When contacting Powerpan, clearly identify the equipment type, such as a pan, tray, mold, or vessel. Include old coating information if available. Do not attempt do-it-yourself chemical stripping, heating, or patching of the damaged area; the professional method is determined for the specific part and system.
What is checked after recoating?
After selecting a body suitable for coating, define the scope of old surface removal and preparation. At delivery, assess appearance, dimensional compatibility, and appropriate inspection methods. A trial with the actual product is a separate step in accepting the surface function. Test or measurement quantities should be agreed for the selected system.
Put the new surface’s maintenance instructions into practice and recheck the old contact points where damage began. If the problem continues, investigate the cause again instead of simply repeating the same treatment. A new appearance or good initial release alone is not a guarantee of long-term durability.
The facility’s quality assessment should determine the return-to-production decision. The scope of assessment for affected products or equipment depends on the circumstances of the incident. Coating services do not replace this facility decision; they provide data for the technical investigation.
The timing of damage helps the investigation. Delamination during first use and localized wear after extended service should not be interpreted in the same way. Recording earlier maintenance, formulation, and equipment changes strengthens this distinction. Keeping photographs with dates and part identification makes comparisons easier.
