A screw coating request should state from the outset whether the part is a fastening screw, a conveying screw, or an extruder screw. These components do not work under the same loads. The surface properties sought for reducing sticking, dosing, or friction control also differ.
Powerpan’s assessment examines the flights, shaft surface, and channels of conveying and feeding screws together with operating conditions. General nonstick coating suitability cannot be assumed for applications involving high pressure and wear, such as extrusion. The part’s function and system limits must be verified separately.
Clearance between the flights and housing
Coating can change final dimensions. The operating clearance between the screw and housing, flight edges, and mounting surfaces should be identified in the drawing. Preserving geometry is particularly important in precision dosing. The layer’s effect on material transport and rotation is assessed after application.
Wear or loss of shape on the screw surface is not automatically corrected by a new coating. The base metal is checked after the old layer is stripped. Repair requirements and coating selection should be considered separately. Providing slip alone does not mean resistance to abrasive material is also provided.
The material being conveyed is decisive
Powders, granules, and dough have different flow behaviors. The material’s moisture, abrasive content, and temperature should be included in the technical request. Lower friction should not be assumed to improve feeding or dosing accuracy in every process; the screw system is checked under its own operating conditions.
- Screw type, material, drawing, and dimensions.
- Operating clearance and mounting areas to be protected.
- Product conveyed, temperature, speed, and load.
- Cleaning chemicals and damaged areas.
For screws conveying food, suitability is assessed through documentation for the relevant system and contact conditions. A management system certificate is not a product-specific approval of the coating formulation. During sample trials or initial use, flow, product buildup, and mechanical contact should be monitored together.
A screw with delamination should be taken out of service for inspection. Hard scraping and contact outside the specified operating clearance can cause new damage. Clarifying the removal, transport, and reinstallation plan together with the quotation scope clearly defines the checks needed for both the surface application and the part’s function.
