Coating selection for barbecue equipment starts with identifying the heat source. A grate immediately above charcoal or a gas flame does not operate under the same conditions as a plate with controlled heating. A grease collection tray is also a different part from the cooking surface. Recommending a general nonstick coating for all equipment without making these distinctions is inappropriate.

Do not assume standard PTFE is suitable for an open flame

The German Federal Institute for Risk Assessment, BfR, advises against overheating PTFE-coated cookware or using it at the high temperatures that can occur directly above a burning flame. A barbecue inquiry therefore cannot be handled like an ordinary pan recoating request. BfR’s guidance on PTFE use explains why this restriction matters.

A system with ceramic in its name is not necessarily suitable for open-flame use either. The selected coating’s temperature limit, compatibility with the heat source, and food-contact conditions must be verified through the product’s technical documentation. A request sent to Powerpan should ask for these documents to be assessed for the intended use.

Operating conditions for individual parts

EquipmentConditions to assess
Grate and cooking rackFlame contact, localized heating, and mechanical rubbing
Griddle plateHeating method, surface temperature, and cleaning tools
Grease collection trayHeat exposure, grease buildup, and cleaning chemicals

Review joints and narrow surfaces on wire or bar grates. Assess surface integrity on cast plates, and corrosion and deformation on trays. A coating is not a process for repairing cracks or distorted geometry.

Request and maintenance information

Share the cooking method along with photographs, dimensions, base metal, and current surface condition. Include sugary sauces, marinated products, and cleaning frequency in the application file. Temperature or service-life commitments should not be made before a suitable system is identified.

Scraping the surface or cleaning it with a stiff metal brush can damage the coating. Monitor surface integrity after use; isolate any peeling part for technical inspection. Determine the maintenance method from the instructions for the equipment and selected coating.

Describe empty idle periods and reheating stages separately in the application file. Areas holding food during cooking and areas left empty can heat differently. Do not decide suitability for the entire part from a single average temperature; identify the most demanding condition.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.