Product buildup and mineral deposits are not the same problem in dairy processing equipment. Protein, fat, and deposits known as milkstone can create different cleaning requirements. A dairy equipment coating assessment starts by identifying which residues form where and how cleaning is currently performed.

Tanks, mixing components, cheese molds, and other contact surfaces perform different tasks. During discussions with Powerpan, the component to be coated should be clearly identified. A nonstick system that makes product release easier does not necessarily prevent all equipment deposits or automatically meet hygiene requirements.

Share CIP conditions in detail

The names, concentrations, temperatures, and contact times of chemicals used in cleaning-in-place systems are assessed together. Acid and alkaline stages, disinfectants, and rinsing should be described separately. A general statement of chemical resistance is not proof of compatibility with a particular CIP program.

Coating may also affect cleaning and inspection methods. The existing hygiene procedure must be compatible with the new surface’s operating instructions. Even if nonstick performance is achieved, that result should not be used to justify eliminating cleaning verification or performing it less often.

Geometry and process function

The effect of an additional layer on the process is assessed separately for heat-transfer surfaces. Mechanical contact on an agitator, holes and product release in a cheese mold, and welds and joints in a tank are different inspection points. Cracks, corrosion, or structural areas that are difficult to clean should not be covered with coating.

  • Equipment material and a drawing of the surfaces to be coated.
  • The dairy product, operating temperature, and contact time.
  • All chemical and temperature information for the CIP program.
  • Existing residue, surface damage, and cleaning records.

Food-contact suitability must be assessed through documentation for the selected system and operating conditions. A management system certificate alone does not demonstrate product-specific suitability of an equipment coating. Product release and cleanability should be monitored separately after application.

If blistering or delamination occurs, the affected equipment should be removed from production and submitted for a quality assessment. Using a stronger cleaner without resolving the cause can put further stress on the surface. A renewal decision should consider the condition of the underlying body and CIP compatibility together.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.