Maintenance tips: monitoring coated equipment

Maintaining coated equipment involves detecting damage early as well as cleaning the surface. When product residue, edge wear, or stacking marks appear on an oven pan, assess them in the context of operating conditions. The maintenance method should follow the instructions for the relevant coating system and equipment.
Do not force residue off during cleaning
Forcing stuck residue off with a metal scraper or scrubbing with abrasive material can damage the surface. Follow the coating instructions when selecting suitable cleaners and tools. A silicone or plastic tool is not automatically safe either if it is dirty, damaged, or unsuitable for the application.
Knowing only a cleaner’s pH is not enough. Concentration, application temperature, contact time, and rinsing requirements must also be assessed. A cleaning method should not be applied in the same way to all PTFE-based or ceramic-containing systems.
Cooling and storage
Avoid suddenly exposing hot equipment to cold water; follow the equipment instructions for cooling. Specifying the same waiting time for every pan would be inappropriate. Drying after cleaning and storage arrangements should also suit the equipment’s conditions of use.
Check whether bodies or edges rub against the coated surface during stacking. If protective separators are used, assess their hygiene and suitability for the application separately; do not use arbitrary cloths or foam on hot equipment.
Record observations
- The product and pan area where sticking occurs.
- The location of scratches, blisters, peeling, or corrosion.
- Changes made to the cleaning method.
- Previous recoating and usage information.
An increase in oil use or cleaning time is not, by itself, proof of coating failure. The recipe, baking process, or operating procedures may have changed. Compare records from similar conditions; do not base recoating decisions on arbitrary percentage thresholds.
During routine inspection, store overall views and close-up details of the pan under the same equipment identifier. This makes it possible to distinguish a new mark from previously recorded damage. Recording cleaning changes with their dates makes conditions easier to compare during a subsequent assessment.
The first step when damage occurs
If the coating is separating or fragments are coming off, remove the affected equipment from production and begin a quality review. Do not decide to return it to service before the assessment is complete. Send overall and close-up photographs, the equipment identifier, and usage information when requesting maintenance or recoating from Powerpan. The scope and availability of on-site support must be discussed separately.
