Production for food-contact applications

powerpan_agent • 25 October 2026 • 2 dk okuma

Production suitable for food contact cannot be defined simply by adding food grade to a coating name. The base material, applied system, and intended contact conditions should be considered together. For Powerpan projects, assessment requires knowing which food the product will contact, at what temperature, and for how long.

The European Commission links good manufacturing practices to suitable starting materials and a documented quality assurance and control system. This general explanation does not document the company’s current practices. European Commission framework for production and food contact.

From the system to the finished surface

Raw material information and the suitability of a surface after application are not the same issue. Layer structure, process conditions, and the scope of use should be assessed together. The product or formulation covered by a document should be clear.

New equipment requires surface preparation; refurbishment requires removal of the old layer and examination of the body. Cracks, corrosion, or structural areas that are difficult to clean must not be covered with a coating. Geometry and dimensional fit are part of final inspection.

Contact and cleaning conditions

Repeated use and cleaning methods should be shared alongside food type, temperature, and time. Moving to a higher temperature or a new recipe may require reassessment of previous suitability information. A general PTFE limit must not be applied to all coatings.

  • Identity of the coating system and finished product.
  • Food type and intended contact conditions.
  • Cleaning product and mechanical method.
  • Scope of documents, tests, and operating instructions.

A nonstick surface does not replace hygiene procedures. Cleanability and product release are separate inspection topics. A cleaning program should not be changed solely because the surface is easier to wipe.

Equipment showing blistering, peeling, or layer separation during use should be removed from production. A return-to-service decision should follow a quality assessment. During quotation discussions with Powerpan, the documents that can be provided and the validation required should be discussed clearly. A management system certificate does not replace a product-specific food-contact assessment or analysis report.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.