When assessing release problems with sweet batters, examine the recipe and the holding time after baking, not just the mold’s age. The same mold may work without problems for one product but show edge sticking with another mixture. Powersilikon is a Powerpan coating option considered for pastry molds. Confirm the system’s composition through the relevant product’s technical documentation.
This system is considered for metal molds used with cakes and similar products. Sugar content alone cannot determine coating selection. Fat, eggs, product moisture, surface temperature, and release method should be considered together. A coating applied to metal and a flexible silicone mold are also different products.
Assess the recipe and geometry together
A flat sponge cake mold and a deeply grooved cake mold do not create the same product contact. Residue in narrow recesses, sticking at internal corners, and product tearing at fine patterns are separate inspection points. Mark these areas before application, and assess mold deformation and existing surface damage as well.
If a release agent is used to remove the product, identify its type. Do not assume in advance that a new coating will eliminate greasing entirely. A use trial with an unchanged recipe provides a better indication of the actual need. Removing fat or sugar buildup should not rely on scraping the surface either.
What should be recorded during the trial?
- Mold material and the area where problems occur.
- Product recipe, baking program, and release timing.
- Release agent used and cleaning method.
- Appearance of the released product’s edges, base, and pattern.
These records help distinguish the effect of changing the coating from differences in baking or application practices. Technical discussions with Powerpan should separately clarify operating limits, food-contact documentation, and the application scope appropriate for the mold. The product name is not evidence of a particular temperature limit or service life.
The mold’s metal body must be sound for refurbishment. Removing the old coating requires professional processing. A mold showing peeling should be removed from production and should not be reused before the surface and product contact have been assessed. Prevent the internal surface from rubbing against other molds during storage, and choose suitable soft cleaning tools.
