A custom coating requirement may arise from a different material or from a hard-to-reach area on an otherwise ordinary pan. Deep grooves, multiple cavities, precision fits, and large surfaces change the application plan. Powergranit custom coating assessment aims to identify these differences through technical drawings and operating information.
Adapting a coating to a nonstandard application does not mean that every operating limit of the existing system can be extended. If temperature, chemical contact, or mechanical loads exceed the technical scope, another system or a different part design may be needed. Color and appearance preferences should not be considered separately from contact suitability either.
Define critical areas on the drawing
Internal corners, narrow recesses, and raised details require assessment of coating distribution. Mounting surfaces and holes matter for dimensional fit. Separating coated areas from protected areas on the drawing reduces the risk of fit problems later. Specify the permitted dimensional change in advance for precision parts.
Preservation of pattern definition in grooved molds such as Gugelhupf or savarin molds is a different acceptance criterion from the flatness of a broad plate. A general expectation of nonstick performance is therefore insufficient for a custom project. Assess visual quality, product release, and assembly function separately.
From sample to production application
The choice of a representative part determines how meaningful the trial will be. The sample should include difficult areas encountered in production, not just an easily coated surface. Recording the recipe, temperature program, cleaning method, and observed surface behavior after the trial makes the effects of changes clearer.
- Part material and current technical drawing.
- Product-contact surfaces and masking areas.
- Operating and cleaning conditions.
- Acceptance criteria, total quantity, and repeat-order requirements.
When defining the scope with Powerpan, address sample needs, inspection methods, and the delivery plan together. Requests for nonstandard dimensions or custom formulations require a feasibility assessment. Material or process changes must also be reported when repeating an approved application; previous results do not automatically carry over to new conditions.
