Difficulty releasing a shoe sole from its mold can leave pull marks on the surface or distort pattern details. A mold coating request should first identify where the problem occurs and with which material. Molds processing PU, EVA, PVC, TPU, and rubber do not operate under identical conditions; a material name alone is not enough to select a coating.

Protect patterns and mounting surfaces

Logos, fine channels, and surface texture in a sole mold are transferred to the finished product. Assess the effect of coating thickness on these details before application. Clearly define the areas to be coated around vents, closing surfaces, and attachment points. Changing the mold’s functional dimensions while trying to improve release can create a new production problem.

Removing old residue during surface preparation and correcting wear in the base metal are different tasks. A coating does not automatically restore a worn-away pattern or damaged mold geometry. Inspection should distinguish these defects from the problem of material sticking to the surface.

Requirements by mold type

For injection molds, consider product contact with the surface and the operating cycle; for compression molds, consider temperature and pressure together. Also report the material and release agents used in rubber vulcanization. Product contact temperature, mold surface temperature, and cleaning chemicals should be included in the same technical file.

  • Mold type, base metal, and technical drawing
  • Compound processed and release agent used
  • Photographs of the area where sticking occurs
  • Patterns, channels, and areas with tolerance requirements

What should be monitored during a trial?

When discussing the application scope with Powerpan, a trial on a representative mold can be considered. Monitor product release, pattern definition, residue buildup, and the cleaning method together. Whether release-agent use can be reduced must be established in the actual process; zero release-agent use should not be promised at the outset.

Compatibility with the cleaner used in production matters when maintaining the coated surface. If damage or peeling appears, isolate the mold concerned and investigate the cause. Defining the quotation scope, preparation work, and acceptance criteria at the start keeps recoating separate from mechanical mold repair.

If multiple mold sets are used in production, maintain separate histories for them. Differences in the appearance of the same pattern across molds should not be attributed solely to coating selection. Review mold wear, process conditions, and the compound used on the same basis during comparison. Preservation of fine details should be included in acceptance checks.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.