The product name alone is not enough when assessing a coating request for pizza, pide, or lahmacun production. The same product can be baked using different ovens, heat sources, and pan constructions. For high-heat oven pan coating, the pan’s actual operating conditions and the selected surface system’s limits must be examined together.

When considering the Powerseramik option, temperature limits, heat source, and food-contact scope should be matched to the relevant technical documentation. Open flames or unusual heat exposure require a separate suitability assessment. The system’s technical information and documentation scope form part of the product assessment.

Heat source and contact time

Direct contact, radiant heat, and hot oven air can create different conditions. Empty pans standing idle and their proximity to hot zones also matter. The controller setting may not show the surface temperature at every point. The assessment must represent actual conditions.

Brief hot contact and continuous operation should not be covered by the same suitability decision. Heating and cooling cycles, cleaning methods, and mechanical loads should also be shared. PTFE-based systems cannot be assumed automatically suitable for high heat or use near open flames.

Check the body and coating together

The pan’s material, thickness, edge profile, and dimensions affect the application decision. A bent or corroded body does not return to its original function with a new coating. Defects exposed after the old surface is stripped require a separate suitability decision.

  • A description of the oven type and heat source.
  • Pan material, dimensions, and operating temperature information.
  • Product contact time and cycle conditions.
  • Cleaning method, release agent, and existing damage.

In the initial application, product release and body shape should be assessed separately. Where a condition exceeds the operating limit, simply changing to a different coating brand is not enough; the system’s actual suitability for the application must be examined. Food contact is also assessed through documentation for the intended conditions.

If delamination, blistering, or significant surface deterioration occurs, the pan should be removed from production and submitted for a quality assessment. Decisions on renewal and reuse should not be made before the cause of the damage is understood. The quotation and delivery plan are developed by defining the scope of technical assessment and verification required.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.