Sticking in one cavity of a roll pan can create differences in appearance between products from the same pan. The problem may occur in different areas of a round hamburger bun cavity and an elongated hot dog bun cavity. Roll pan coating services assess these multicavity surfaces through operating conditions and the condition of the metal body.

Round, oval, and elongated cavities guide product shape. Cavity depth, base slope, and edge transitions must be considered during application. The aim is appropriate coating distribution on the product-contact surface while preserving these geometric features. Neither cavity count nor product type alone determines coating selection.

Not every cavity may be in the same condition

Manual depanning may involve more intervention in certain cavities. In an automated depanning system, misalignment can place stress on particular edges. If wear recurs in the same locations, examine the depanning method before applying a new coating. A coating does not replace correction of a mechanical setting problem.

The pan frame, joints between cavities, and stacking areas are also part of the inspection. A body with impact damage or weakened connections may remain unsuitable for line use even after its surface is renewed. Corrosion and cracks revealed when the old layer is removed require separate assessment.

Information for a coating project

  • Pan dimensions, material, and cavity shape.
  • Product weight and dough recipe.
  • Oven program and depanning system.
  • Cavities where sticking occurs and the cleaning method.

In Powerpan’s technical assessment, this information helps identify an appropriate surface system and inspection areas. Examining products from different cavities together after the first application provides more information than looking only at the pan’s overall appearance. Edge tearing and residue left on the base can be recorded separately.

For bulk refurbishment, grouping pans by type and wear condition makes production planning easier. Determine spare-pan requirements before shipping. During use, do not scrape inside cavities with metal tools, and reduce rubbing between coated surfaces in stacks. Set aside a pan showing peeling; decide whether it can be reused after inspection.

Contact us for a project quotation

Tell us about your baking equipment or recoating requirements, including dimensions, quantities and operating conditions.