Coating expert opinions

Before seeking technical advice on a coating, describe the function expected of the surface. Difficulty releasing a product from a pan, longer cleaning times, and scratches in particular areas call for different investigations. Asking only for the coating name will not distinguish these problems. Build the assessment around the equipment identity, operating conditions, and observed symptoms.
Connect the technical question to operating conditions
Örkon Kimya’s service overview lists different coating families, including PTFE, FEP, and PFA. This range is a reminder that the family name alone is not a selection criterion. Ask about the coating system’s product code, the metal to be coated, and the function it is expected to perform together. Two systems with similar names should not be assumed to deliver the same result under the same conditions.
For a baking pan, records can include the product recipe, filling method, baking program, and product removal method. Keep the oven setting and measured pan surface temperature in separate fields. Include the cleaner’s name, concentration, contact time, and cleaning tools in the file. Marking unmeasured information as an estimate is more useful than presenting false certainty.
Do not present a symptom as a cause
Sticking, discoloration, or edge damage alone does not explain the root cause. Establish whether the problem affects the whole pan, the same corner, or only particular products. Match photographs to equipment identities and dates. Include an image of the complete part alongside close-ups so the location of the damage is clear.
| Observation | Question for the discussion |
|---|---|
| Release difficulty with a particular product | Did it begin around the time of a recipe or process change? |
| Damage at edges and corners | Is there contact during stacking, handling, or product removal? |
| A change following cleaning | Did the chemical, dosage, or cleaning tool change? |
Define the limits of a sample trial
Before introducing a new system across the entire pan group, prepare a trial plan using representative parts. Compare the existing and proposed systems under the same product and process conditions wherever possible. Record product release, cleaning requirements, and visible surface changes using a method defined in advance. A positive result during one shift should not be taken as evidence of a long service life.
Limit the variables changed in the trial. If the coating, cleaner, and product recipe all change together, it becomes difficult to identify which change produced the result. Establish stopping and inspection conditions, the observation period, and the people responsible for assessment before the trial begins.
Turn the advice into written acceptance criteria
The technical assessment should end with a written record of the proposed system, assessment conditions, and checks still required. Review the technical data sheet, any conformity documents for the intended use, and maintenance instructions separately. General product information does not replace this file. Include trial expectations with the parts list sent to Powerpan; the operations covered by the quotation and responsibility for acceptance should also be clarified.
